Mandriva Linux Installation Instructions - Mandriva Linux 2006 Required configuration * Pentium processor or compatible * CDROM drive * At least 32 MB RAM, 64 MB recommended Installing Mandriva Linux is, in most cases, as simple as putting your Installation CD in your CDROM drive, and restarting your machine. Please refer to point 1. NOTE: * If you upgrade from 7.x, 8.x or 9.x Mandriva Linux versions, do not forget to backup your system. * Upgrading from earlier versions (prior to 7.0) is NOT supported. In that case, you need to do a fresh installation and not an update. ============================================================================ Below are listed the different ways to install Mandriva Linux: 1. Boot directly from CD 2. Make a boot floppy with Windows 3. Other install methods ============================================================================ 1. Boot directly from CD The Installation CDROM is bootable. In most cases, just insert the CD into the drive and reboot the machine. Follow the instructions displayed on screen: press the [Enter] key to start the installation, or press [F1] for additional help. NOTE: On some laptops (portable computers), the system may not be able to boot from the CD. In such a case, you should prepare a boot floppy. See point 2 for details. ============================================================================ 2. Make a boot floppy with Windows If your computer cannot boot from the CDROM, you must make a boot floppy under Windows as follows: * insert the CDROM, then open the icon "My Computer", right click on the CDROM drive icon and select "Open" * go into the "dosutils" directory and double-click on the "rawwritewin" icon * insert a blank floppy in the floppy drive * select "D:\images\cdrom.img" in the "Image File" field (assuming that your CDROM drive is "D:", otherwise replace "D:" as needed) * select "A:" in the "Floppy Drive" field then click on "Write". To begin the installation: * insert the CDROM in the drive, as well as the boot floppy, then * restart the computer. ============================================================================ 3. Other installation methods If for any reason the previous methods do not fit your needs (you want to perform a network install, an install from pcmcia devices orĀ ...), you will also need to make a boot floppy: * Under Linux (or other modern UNIX systems) type at prompt: $ dd if=xxxxx.img of=/dev/fd0 * Under Windows, follow the method described in point 2, but using xxxxx.img (see below) instead of cdrom.img. * Under DOS, assuming your CD is drive D:, type: D:\> dosutils\rawrite.exe -f install\images\xxxxx.img -d A Here the list of boot images: +-----------------+------------------------------------------------------+ | cdrom.img | install from CD-ROM | +-----------------+------------------------------------------------------+ | hd_grub.img | install from hard-disk (from a Linux, | | | Windows, or ReiserFS filesystem) | | | you can configure it for your system at: | | | http://qa.mandriva.com/hd_grub.cgi | +-----------------+------------------------------------------------------+ | network.img | install from ftp/nfs/http | | | NOTE: you will need to insert network_drivers.img | | | in your floppy drive when prompted | +-----------------+------------------------------------------------------+ | pcmcia.img | install from pcmcia devices (warning, most pcmcia | | | network adapters are now directly supported | | | from network.img) | +-----------------+------------------------------------------------------+ You may also burn boot.iso on a CDROM and boot from it. It supports all installations methods, cdrom, network, and hard-disk. ============================================================================ You can also use a text mode installation if, for any reason, you have trouble with the default graphical installation. To use it, press [F1] at Mandriva Linux welcome screen, then type text at the prompt. If you need to rescue your existing Mandriva Linux system, insert your Installation CDROM (or any relevant boot floppy), press [F1] at Mandriva Linux welcome screen, then type rescue at the prompt. See http://www.mandrivalinux.com/drakx/README for more technical information. ============================================================================ Below are the main stages of installation: 1. Insert your Installation CDROM (or Installation Floppy disk if necessary) and restart your machine. 2. Press [Enter] when the Mandriva Linux welcome screen appears and carefully follow the instructions. 3. When the installation is complete take out the CD-ROM when ejected (and any floppy disk if present in drive); your machine will restart. If it does not, restart it manually. 4. Mandriva Linux will start. After bootup, you can login on your machine under the user account setup during install, or as "root". Important note: The "root" account will give you unrestricted access to your Linux system. Do not use it except to configure or administer Linux. For every day use, use a normal user account which you can configure with the "userdrake" tool, or with the commands "adduser" and "passwd". Good luck with Mandriva Linux! ============================================================================ For additional support, see the following: * E-Support at http://www.mandrivaexpert.com/ * Mandriva Linux Errata at http://www.mandrivalinux.com/en/errata.php3 * Mandriva Linux Security Advisories at http://www.mandriva.com/security/advisories * On-line Documentation at http://www.mandrivalinux.com/en/fdoc.php3 * Read and join the On-line Discussion Forums of Mandriva Club at http://club.mandriva.com * Join the Mailing Lists at http://www.mandrivalinux.com/en/flists.php3 * Easily Searchable Mailing List archives at http://marc.theaimsgroup.com/ * Search the Internet using Google for Linux http://www.google.com/linux * Search Usenet Groups using Google Groups at http://groups.google.com/groups?group=comp ============================================================================