Mandrake Linux Installation Instructions - Mandrake Linux 9.0 Available (but may be outdated): o ENGLISH o FRENCH - doc/install/fr/README o SPANISH - doc/install/es/README o GERMAN - doc/install/de/README o ITALIAN - doc/install/it/README and many other languages; look at "doc/install/" there may be a directory for your language. If not (yet); contributors are welcome! ============================================================================ +--------------------------------------------+ | Mandrake Linux - Installation instructions | +--------------------------------------------+ Required configuration * Pentium processor or compatible * CDROM drive * At least 32 MB RAM, 64 MB recommended Installing Mandrake Linux is, in most cases, as simple as putting your Installation CD in your CDROM drive, and restarting your machine. Please refer to point 1. NOTE: * If you upgrade from 7.0, 7.1, 7.2, 8.0 or 8.1 Mandrake Linux versions, do not forget to backup your system. * Upgrading from earlier versions (prior to 7.0) is NOT supported. In that case, you need to do a fresh installation and not an update. ============================================================================ You can also install Mandrake Linux onto a Windows 95/98/ME system, using Linux for Windows. This does not require disk partitioning, and installs Linux in a Windows folder. It is a convenient way to discover Mandrake Linux without modifying your Windows system. It is however significantly slower than a regular installation. Also, your Mandrake Linux installation is lost if you re-install Windows. Please refer to point 2 to use Linux for Windows. Below are listed the different ways to install Mandrake Linux: 1. Boot directly from CD 2. Installing onto Windows 95/98/ME 3. Make a boot floppy with Windows 4. Other install methods ============================================================================ 1. Boot directly from CD The Installation CDROM is bootable. In most cases, just insert the CD into the drive and reboot the machine. Follow the instructions displayed on screen: press the [Enter] key to start the installation, or press [F1] for additional help. NOTE: On some portable computers, the system may not reboot from the CD. If this is the case, you should prepare a boot floppy. See point 3 for details. ============================================================================ 2. Installing onto Windows 95/98/ME To install Mandrake Linux within a Windows folder, avoiding any disk partitioning, you should: 1. Insert the first CD, 2. Reboot the system, 3. Press [F1] when the Mandrake Linux screen comes up, 4. Type lnx4win at the prompt, then press [Enter] Follow the instructions shown on screen. Additional details on lnx4win can be found in the appropriate readme file. NOTE: When inserting the CDROM under Windows, a window will popup to give you access to an installation summary and to Mandrake Linux demos and tutorial. It will also permit you to create directly the boot floppy described in point 3. If the window does not popup, run: D:\dosutils\autorun.exe (assuming D is your CDROM's drive letter). ============================================================================ 3. Make a boot floppy with Windows If your computer cannot boot from the CDROM and previous methods do not work, you must make a boot floppy under Windows as follows: * insert the CDROM, then open the icon "My Computer", right click on the CDROM drive icon and select "Open" * go into the "dosutils" directory and double-click on the "rawwritewin" icon * insert a blank floppy in the floppy drive * select "D:\images\cdrom.img" in the "Image File" field (assuming that your CDROM drive is "D:", otherwise replace "D:" as needed) * select "A:" in the "Floppy Drive" field then click on "Write". To begin the installation: * insert the CDROM in the drive, as well as the boot floppy, then * restart the computer. ============================================================================ 4. Other installation methods If for any reason the previous methods do not fit your needs (you want to perform a network install, an install from pcmcia devices or...), you will need to make a boot floppy: * Under Linux (or other modern UNIX systems) type at prompt: $ dd if=xxxxx.img of=/dev/fd0 * Under Windows, follow the method described in point 3, but using xxxxx.img (see below) instead of cdrom.img. * Under DOS, assuming your CD is drive D:, type: D:\> dosutils\rawrite.exe -f images\xxxxx.img -d A where "xxxxx.img" is one of the available boot images: +---------------+----------------------------------------------------+ | cdrom.img | install from CD-ROM | |---------------+----------------------------------------------------| | hd.img | install from hard-disk (from a Linux, Windows, or | | | ReiserFS filesystem) | |---------------+----------------------------------------------------| | network.img | install from ftp/nfs/http | |---------------+----------------------------------------------------| | other.img | install using seldom used hardware drivers | |---------------+----------------------------------------------------| | pcmcia.img | install from pcmcia devices | |---------------+----------------------------------------------------| | usb.img | install from USB devices: USB network adapters, or | | | USB CDROM/CDRW's | |---------------+----------------------------------------------------| | blank.img | install using your own Linux kernel | +---------------+----------------------------------------------------+ blank.img is a minimal image to customize kernel installation. ============================================================================ You can also use a text mode installation if, for any reason, you have trouble with the default graphical installation. To use it, press [F1] at Mandrake Linux welcome screen, then type "text" at the prompt. If you need to rescue your existing Mandrake Linux system, insert your Installation CDROM (or any relevant boot floppy), press [F1] at Mandrake Linux welcome screen, then type rescue at the prompt. See http://www.linux-mandrake.com/drakx/README for more technical information. ============================================================================ Below are the main stages of installation: 1. Insert your Installation CDROM (or Installation Floppy disk if necessary) and restart your machine. 2. Press [Enter] when the Mandrake Linux welcome screen appears and carefully follow the instructions. 3. When the installation is complete take out the CD-ROM when ejected (and any floppy disk if present in drive); your machine will restart. If it does not, restart it manually. 4. Mandrake Linux will start. After bootup, you can login on your machine under the user account setup during install, or as "root". Important note: The "root" account will give you unrestricted access to your Linux system. Do not use it except to configure or administer Linux. For every day use, use a normal user account which you can configure with the "userdrake" tool, or with the commands "adduser" and "passwd". Good luck with Mandrake Linux ! ============================================================================ For installation support see the Mandrake Linux diffusion list and FAQs at the web site: * http://www.mandrakelinux.com/