Test Case:     Autodimm brightness
Categories:    Desktop, KDE, Brightness
Requirements:  KDE Installation, a machine with a supported brightness 
               interface
Depends On:    Test Case 09

Action:
============================
Start KDE as normal user, check if KPowersave is running (check for the 
KPowersave icon in the taskbar, or "ps aux | grep KPowersave").

Be sure that Test Case #09 fulfilled on your machine.

Configure KPowersave for autodimm brightness:
- click on the applet icon with right mouse button, select 
  'Configure KPowersave ...'
- select the Performance scheme in the 'Scheme Settings' tab
- select the 'Autodimm' page in the toolbox
- select/enable the 'Enable autodumm the display' checkbox
- set a time after which the display should get dimmed (e.g. 1 or 2 min)
- set a level to which the brightness should get dimmed (e.g. 15%)
- close the config dialog via the 'OK' button

Select now the 'Performance' scheme via the applet menu ('Set Active Scheme' 
--> 'Performance') Now wait the selected time and don't touch mouse, 
keyboard or touchpad within this time.

Expected Results:
============================
After the defined time (+max. ~30 seconds) the display should get dimmed 
down to the defined level.

If the user now press a key or move the mouse/touchpad the display should 
get dimmed up to the normal (previous) level.